Restraints using electron microscopy 2D images (class averages). More...

Detailed Description

Restraints using electron microscopy 2D images (class averages).

The main functionalities are:

Raading and writing EM images
Basic image processing: filtering, morphological operations, segmentation
Image alignment and calculation of cross correlation
Implements several Restraints.

The restraints vary based on how accurately the fit to the class averages is computed, which is usually related to the evaluation speed. Pick more accurate Restraints for higher resolution images and models. Below is the Restraints list sorted from the fastest and most simple to the slowest and most accurate.

PCAFitRestraint - compares how well the principal components of the segmented class average fit to the principal components of the particles
EM2DRestraint - implements FFT based image alignment. This Restraint in turn uses internally the Fine2DRegistrationRestraint. Don't use the latter one directly. The information obtained after matching a projection with the EM image is stored in RegistrationResult.

The module goes together with the EMageFit application, that uses the EM2DRestraint for modeling of macromolecular assemblies using class averages. The algorithm is described in the PNAS paper below.

As a side note, the class Image has a header that is specific for EM images, but if you don't care for that information, you can use the class to deal with any sort of image, not only EM.

OpenCV

The module works with OpenCV 2.1 or above.

Info

Author(s): Javier Velázquez-Muriel, Daniel Russel, Dina Schneidman

Maintainer: benmwebb

License: GPL This library is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

Publications:

See main IMP papers list.
J. A. Velázquez-Muriel, K. Lasker, D. Russel, J. Phillips, B. M. Webb, D. Schneidman-Duhovny, A. Sali, "Assembly of macromolecular complexes by satisfaction of spatial restraints from electron microscopy images", Proc Natl Acad Sci USA 109(46), 18821-18826, 2012.
D. Schneidman-Duhovny et al. "A method for integrative structure determination of protein-protein complexes", Bioinformatics 28(24), 282-9, 2012.

Classes
class	AverageDistanceLinkage
	Functor for hierarchical clustering based on average-linkage. More...

class	CenteredMat

class	ChiSquaredScore
	Score based on Chi^2 = ((pixels_image - pixels_projection)/stddev_image)^2. More...

class	ClusterSet
	A class to store the clusters generated during hierarchical clustering. More...

class	CollisionCrossSection
	Determine the collision cross section for some projections of particles. More...

class	CompleteLinkage
	Functor for hierarchical clustering based on complete linkage. More...

class	DistanceFilter
	SubsetFilter for checking overlap between projections and images. More...

class	DistanceFilterTable

class	DummyRestraint
	Dummy restraint between two particles. More...

class	Em2DRestraint

class	Em2DRestraintParameters
	Parameters used by Em2DRestraint and ProjectionFinder. More...

class	EM2DScore

class	Fine2DRegistrationRestraint

class	GridStates

class	HasHigherCCC
	Comparison by value of the ccc. More...

class	HasLowerScore
	Compare two classes that return a score. More...

class	Image
	2D Electron Microscopy images in IMP More...

class	ImageReaderWriter
	Virtual class for reader/writers of images. More...

class	IntsOrder

class	JPGImageReaderWriter
	Class to read and write EM images in JPG format. More...

class	LessPairBySecond
	Comparison of pairs by checking the second element. More...

class	MasksManager
	Management of projection masks. More...

class	MatchTemplateResult

class	MeanAbsoluteDifference
	Score based on the mean of the absolute difference. More...

class	ParticlesDummyRestraint
	Dummy restraint for a set of particles. Same use as DummyRestraint. More...

class	PCAFitRestraint
	Fast scoring of Particles against electron microscopy class averages. More...

class	PolarResamplingParameters

class	ProjectingOptions
	Parameters given as options to the get_projections() functions. More...

class	ProjectingParameters
	Parameters needed for the core projection routine. More...

class	ProjectionFinder
	Class to perform registration of model projections to images. More...

class	ProjectionMask

class	ProjectionParameters

class	ProjectionParametersScoreState

class	ProjectionStates

class	RegistrationResult
	Class to manage registration results. More...

class	RelativePositionMover

class	RigidBodiesImageFitRestraint
	Fit rigid bodies to an image. More...

class	ScoreFunction
	Base class for all scoring functions related to em2d. More...

class	SegmentationParameters
	Class to provide all the parameters to the segmentation function. More...

class	SingleLinkage
	Functor for hierarchical clustering based on single linkage. More...

class	SpiderImageReaderWriter

class	TIFFImageReaderWriter
	Management of reading/writing TIFF images. More...

Typedefs
typedef IMP::Vector < AverageDistanceLinkage >	AverageDistanceLinkages

typedef IMP::Vector < IMP::Pointer < ChiSquaredScore > >	ChiSquaredScores

typedef IMP::Vector < IMP::WeakPointer < ChiSquaredScore > >	ChiSquaredScoresTemp

typedef IMP::Vector< ClusterSet >	ClusterSets

typedef IMP::Vector < IMP::Pointer < CollisionCrossSection > >	CollisionCrossSections

typedef IMP::Vector < IMP::WeakPointer < CollisionCrossSection > >	CollisionCrossSectionsTemp

typedef IMP::Vector < CompleteLinkage >	CompleteLinkages

typedef cv::MatConstIterator_ < double >	cvDoubleConstMatIterator

typedef cv::Mat_< double >	cvDoubleMat

typedef cv::MatIterator_< double >	cvDoubleMatIterator

typedef cv::Mat_< int >	cvIntMat

typedef cv::MatIterator_< int >	cvIntMatIterator

typedef cv::Point_< int >	cvPixel

typedef std::vector< cvPixel >	cvPixels

typedef IMP::Vector < IMP::Pointer< DistanceFilter > >	DistanceFilters

typedef IMP::Vector < IMP::WeakPointer < DistanceFilter > >	DistanceFiltersTemp

typedef IMP::Vector < IMP::Pointer < DistanceFilterTable > >	DistanceFilterTables

typedef IMP::Vector < IMP::WeakPointer < DistanceFilterTable > >	DistanceFilterTablesTemp

typedef IMP::Vector < IMP::Pointer< DummyRestraint > >	DummyRestraints

typedef IMP::Vector < IMP::WeakPointer < DummyRestraint > >	DummyRestraintsTemp

typedef IMP::Vector < Em2DRestraintParameters >	Em2DRestraintParametersList

typedef IMP::Vector < IMP::Pointer< Em2DRestraint > >	Em2DRestraints

typedef IMP::Vector < IMP::WeakPointer < Em2DRestraint > >	Em2DRestraintsTemp

typedef IMP::Vector < IMP::Pointer< EM2DScore > >	EM2DScores

typedef IMP::Vector < IMP::WeakPointer< EM2DScore > >	EM2DScoresTemp

typedef IMP::Vector < IMP::Pointer < Fine2DRegistrationRestraint > >	Fine2DRegistrationRestraints

typedef IMP::Vector < IMP::WeakPointer < Fine2DRegistrationRestraint > >	Fine2DRegistrationRestraintsTemp

typedef IMP::Vector < IMP::Pointer< GridStates > >	GridStatesList

typedef IMP::Vector < IMP::WeakPointer< GridStates > >	GridStatesListTemp

typedef IMP::Vector < IMP::Pointer< Image > >	Images
	A vector of reference counted pointers to EM images of type double. More...

typedef IMP::Vector < IMP::WeakPointer< Image > >	ImagesTemp

typedef std::map< Ints, unsigned int, IntsOrder >	KeyIndexMap

typedef std::vector< KeyIndexMap >	KeyIndexMaps

typedef std::pair< Ints, unsigned int >	KeyIndexPair

typedef boost::shared_ptr < MasksManager >	MasksManagerPtr

typedef IMP::Vector< MasksManager >	MasksManagers

typedef IMP::Vector < MatchTemplateResult >	MatchTemplateResults

typedef IMP::Vector < IMP::Pointer < MeanAbsoluteDifference > >	MeanAbsoluteDifferences

typedef IMP::Vector < IMP::WeakPointer < MeanAbsoluteDifference > >	MeanAbsoluteDifferencesTemp

typedef IMP::Vector < IMP::Pointer < ParticlesDummyRestraint > >	ParticlesDummyRestraints

typedef IMP::Vector < IMP::WeakPointer < ParticlesDummyRestraint > >	ParticlesDummyRestraintsTemp

typedef IMP::Vector < PolarResamplingParameters >	PolarResamplingParametersList

typedef IMP::Vector < ProjectingOptions >	ProjectingOptionsList

typedef IMP::Vector < ProjectingParameters >	ProjectingParametersList

typedef IMP::Vector < IMP::Pointer < ProjectionFinder > >	ProjectionFinders

typedef IMP::Vector < IMP::WeakPointer < ProjectionFinder > >	ProjectionFindersTemp

typedef boost::shared_ptr < ProjectionMask >	ProjectionMaskPtr

typedef IMP::Vector < ProjectionMask >	ProjectionMasks

typedef IMP::Vector < ProjectionParameters >	ProjectionParametersList

typedef IMP::Vector < IMP::Pointer < ProjectionStates > >	ProjectionStatesList

typedef IMP::Vector < IMP::WeakPointer < ProjectionStates > >	ProjectionStatesListTemp

typedef IMP::Vector < RegistrationResult >	RegistrationResults

typedef std::pair < algebra::Transformation2D, double >	ResultAlign2D

typedef IMP::Vector < IMP::Pointer < RigidBodiesImageFitRestraint > >	RigidBodiesImageFitRestraints

typedef IMP::Vector < IMP::WeakPointer < RigidBodiesImageFitRestraint > >	RigidBodiesImageFitRestraintsTemp

typedef IMP::Vector < IMP::Pointer< ScoreFunction > >	ScoreFunctions

typedef IMP::Vector < IMP::WeakPointer < ScoreFunction > >	ScoreFunctionsTemp

typedef IMP::Vector < SegmentationParameters >	SegmentationParametersList

typedef IMP::Vector < SingleLinkage >	SingleLinkages

typedef std::vector < algebra::Transformation3Ds >	Transformation3DsList

Functions
void	add_noise (cv::Mat &v, double op1, double op2, const String &mode="uniform", double df=3)
	Add noise to the values of a matrix. More...

void	add_noise (Image *im1, double op1, double op2, const String &mode="uniform", double df=3)

void	apply_circular_mask (const cv::Mat &mat, cv::Mat &result, int radius, double value=0.0)

void	apply_diffusion_filter (const cv::Mat &m, cv::Mat &result, double beta, double pixelsize, unsigned int time_steps)

void	apply_diffusion_filter (Image input, Image filtered, double beta, double pixelsize, int time_steps)

void	apply_mask (const cv::Mat &m, cv::Mat &result, const cvIntMat &mask, double val)
	Applies a binary mask to an image. More...

void	apply_mean_outside_mask (Image *img, double radius)

void	apply_threshold (cv::Mat &m, cv::Mat &result, double threshold=0.0)

void	apply_variance_filter (const cv::Mat &input, cv::Mat &filtered, int kernelsize)

void	apply_variance_filter (Image input, Image filtered, int kernelsize)

cvIntMat	create_circular_mask (int rows, int cols, int radius)

Images	create_evenly_distributed_projections (const ParticlesTemp &ps, unsigned int n, const ProjectingOptions &options)

void	crop (Image *img, const IntPair &center, int size)

cv::Mat	crop (const cv::Mat &m, const IntPair &center, int size)

void	do_combined_fill_holes_and_threshold (cv::Mat &m, cv::Mat &result, double n_stddevs, double threshold=0.0)
	Combines the fill holes and thresholding operations together with normalize. More...

void	do_combined_fill_holes_and_threshold (Image input, Image result, double n_stddevs)

void	do_dilate_and_shrink_warp (cv::Mat &m, const cv::Mat &grayscale, cv::Mat &kernel)
	(U. Adiga, 2005) More...

void	do_extend_borders (cv::Mat &orig, cv::Mat &dst, unsigned int pix)

void	do_extend_borders (Image im1, Image im2, unsigned int pix)

void	do_fill_holes (const cv::Mat &m, cv::Mat &result, double h)
	Fills the holes in the matrix m of height h. More...

void	do_fill_holes (Image input, Image result, double n_stddevs)

template<class LinkageFunction >
ClusterSet	do_hierarchical_agglomerative_clustering (const FloatsList &distances)
	Function to perform agglomerative clustering. More...

void	do_histogram_stretching (cv::Mat &m, int boxes, int offset)

int	do_labeling (const cvIntMat &m, cvIntMat &mat_to_label)
	Labeling function for a matrix. More...

void	do_matrix_to_image_flip (cv::Mat &m)

void	do_morphologic_contrast_enhancement (const cv::Mat &m, cv::Mat &result, const cv::Mat &kernel, unsigned int iterations)

void	do_morphologic_reconstruction (const cv::Mat &mask, cv::Mat &marker, int neighbors_mode=4)
	morphologic grayscale reconstruction (L Vincent, 1993) More...

void	do_normalize (Image *im, bool force=false)

void	do_normalize (cv::Mat &m)
	Normalize a openCV matrix to mean 0 and stddev 1. It is done in place. More...

void	do_place (cv::Mat &mask, cv::Mat &m, const algebra::Vector2D &v)

void	do_project_particles (const ParticlesTemp &ps, cv::Mat &m2, const algebra::Rotation3D &R, const algebra::Vector3D &translation, const ProjectingOptions &options, MasksManagerPtr masks)
	Projects a set of particles. This is the core function that others call. More...

algebra::Vector2Ds	do_project_vectors (const algebra::Vector3Ds &ps, const algebra::Rotation3D &R, const algebra::Vector3D &translation)
	Project the points contained in Vector3Ds to gen vectors in 2D. More...

algebra::Vector2Ds	do_project_vectors (const algebra::Vector3Ds &ps, const algebra::Rotation3D &R, const algebra::Vector3D &translation, const algebra::Vector3D &center)
	Project the points contained in Vector3Ds. More...

void	do_remove_small_objects (cvIntMat &m, double percentage, int background=0, int foreground=1)
	Removes small objects from a matrix of integers. More...

void	do_remove_small_objects (Image *input, double percentage, int background=0, int foreground=1)

void	do_resample_polar (const cv::Mat &input, cv::Mat &resampled, const PolarResamplingParameters &polar_params)
	Resamples a matrix to polar coordinates. More...

void	do_resample_polar (Image im1, Image im2, const PolarResamplingParameters &polar_params)

void	do_segmentation (const cv::Mat &m, cv::Mat &result, const SegmentationParameters &params)
	Segmentation of images. More...

void	do_segmentation (Image input, Image result, const SegmentationParameters &params)

void	do_subtract_images (Image first, Image second, Image *result)

void	get_autocorrelation2d (const cv::Mat &m, cv::Mat &corr)
	Computes the autocorrelation matrix. More...

void	get_autocorrelation2d (Image im1, Image im2)

void	get_autocorrelation2d_no_preprocessing (const cv::Mat &M, cv::Mat &corr)
	Autocorrelation without preprocessing. More...

double	get_average_rotation_error (const RegistrationResults &correct_RRs, const RegistrationResults &computed_RRs)

double	get_average_shift_error (const RegistrationResults &correct_RRs, const RegistrationResults &computed_RRs)

MatchTemplateResults	get_best_template_matches (const cv::Mat &m, const cv::Mat &templ, unsigned int n)

ResultAlign2D	get_complete_alignment (const cv::Mat &input, cv::Mat &m_to_align, bool apply=false)

em2d::ResultAlign2D	get_complete_alignment_no_preprocessing (const cv::Mat &input, const cv::Mat &INPUT, const cv::Mat &POLAR1, cv::Mat &m_to_align, const cv::Mat &POLAR2, bool apply=false)

ResultAlign2D	get_complete_alignment_with_centers_no_preprocessing (const algebra::Vector2D &center1, const algebra::Vector2D &center2, const cv::Mat &AUTOC_POLAR1, const cv::Mat &AUTOC_POLAR2)

void	get_correlation2d (const cv::Mat &A, const cv::Mat &B, cv::Mat &corr)
	Correlation matrix between two 2D matrices using FFT. More...

void	get_correlation2d (Image im1, Image im2, Image *corr)

void	get_correlation2d_no_preprocessing (const cv::Mat &M1, const cv::Mat &M2, cv::Mat &corr)
	Correlation without preprocessing. More...

double	get_cross_correlation_coefficient (const cv::Mat &m1, const cv::Mat &m2)
	Computes the cross-correlation coefficient between to matrices. More...

double	get_cross_correlation_coefficient (Image im1, Image im2)
	Cross correlation between two images. More...

void	get_diffusion_filtering_partial_derivative (const cv::Mat &m, cv::Mat &der, double dx, double dy, double ang)

void	get_domes (cv::Mat &m, cv::Mat &result, double h)
	Gets the domes of m with height h. More...

unsigned int	get_enclosing_image_size (const ParticlesTemp &ps, double pixel_size, unsigned int slack)
	Get an automatic size for an image that contains the particles. More...

RegistrationResults	get_evenly_distributed_registration_results (unsigned int n_projections)

void	get_fft_using_optimal_size (const cv::Mat &m, cv::Mat &M)

double	get_global_score (const RegistrationResults &RRs)

Floats	get_histogram (const cv::Mat &m, int bins)
	Computes the histogram of a matrix. More...

Floats	get_histogram (Image *img, int bins)

double	get_mean (const cv::Mat &mat, const cvIntMat &mask)

void	get_morphologic_gradient (const cv::Mat &m, cv::Mat &result, const cv::Mat &kernel)

double	get_overlap_percentage (cv::Mat &m1, cv::Mat &m2, const IntPair &center)

void	get_projection (em2d::Image *img, const ParticlesTemp &ps, const RegistrationResult &reg, const ProjectingOptions &options, MasksManagerPtr masks=MasksManagerPtr(), String name="")
	Generates a projection from particles. More...

em2d::Images	get_projections (const ParticlesTemp &ps, const algebra::SphericalVector3Ds &vs, int rows, int cols, const ProjectingOptions &options, Strings names=Strings())
	Generates projections from particles. More...

em2d::Images	get_projections (const ParticlesTemp &ps, const RegistrationResults &registration_values, int rows, int cols, const ProjectingOptions &options, Strings names=Strings())
	Generates projections from particles. More...

RegistrationResults	get_random_registration_results (unsigned int n, double maximum_shift=5.0)
	Provides a set of random registration results (or parameters) More...

double	get_rotation_error (const RegistrationResult &rr1, const RegistrationResult &rr2)

em2d::ResultAlign2D	get_rotational_alignment (const cv::Mat &input, cv::Mat &m_to_align, bool apply=false)

ResultAlign2D	get_rotational_alignment_no_preprocessing (const cv::Mat &POLAR1, const cv::Mat &POLAR2)

double	get_shift_error (const RegistrationResult &rr1, const RegistrationResult &rr2)
	Distance between the two in-plane translations. More...

void	get_spectrum (const cv::Mat &m, cv::Mat &real, cv::Mat &imag)
	Computes the fft of a matrix and returns the real and imaginary matrices. More...

void	get_transformed (const cv::Mat &input, cv::Mat &transformed, const algebra::Transformation2D &T)

ResultAlign2D	get_translational_alignment (const cv::Mat &input, cv::Mat &m_to_align, bool apply=false)
	Aligns two matrices translationally. More...

ResultAlign2D	get_translational_alignment_no_preprocessing (const cv::Mat &M1, const cv::Mat &M2)

Ints	get_unique_index (const algebra::Rotation3D &rot)
	Map a rotation to a list of 4 "unique" integers. More...

template<class T >
void	print_vector (const std::vector< T > &v)

Images	read_images (const Strings &names, const ImageReaderWriter *rw)

RegistrationResults	read_registration_results (const String &filename)
	Reads a set of registration results. More...

void	save_images (Images images, const Strings &names, const ImageReaderWriter *rw)

void	show (const cv::Mat &m, std::ostream &out=std::cout)
	Prints a OpenCV matrix. More...

template<typename T >
void	show (const cv::Mat_< T > &m, std::ostream &out=std::cout)
	Show a Mat_. More...

void	write_matrix (cv::Mat &m, std::string name)
	Quick and dirty way of writing a OpenCV matrix to a Spider image. More...

void	write_registration_results (String filename, const RegistrationResults &results)
	Writes a set of registration results. More...

void	write_vectors_as_pdb (const algebra::Vector2Ds vs, const String filename)

void	write_vectors_as_pdb (const algebra::Vector3Ds vs, const String filename)

Variables
const unsigned int	ALIGN2D_NO_PREPROCESSING = 0
	Methods for registration used by the finder. More...

const unsigned int	ALIGN2D_PREPROCESSING = 1

const unsigned int	ALIGN2D_WITH_CENTERS = 2

Standard module functions
All `IMP` modules have a set of standard functions to help get information about the module and about files associated with the module.
std::string	get_module_version ()
	Return the version of this module, as a string. More...

std::string	get_module_name ()

std::string	get_data_path (std::string file_name)
	Return the full path to one of this module's data files. More...

std::string	get_example_path (std::string file_name)
	Return the full path to one of this module's example files. More...

Typedef Documentation

typedef IMP::Vector< AverageDistanceLinkage > IMP::em2d::AverageDistanceLinkages

Pass or store a set of AverageDistanceLinkage .

Definition at line 170 of file hierarchical_clustering.h.

typedef IMP::Vector<IMP::Pointer< ChiSquaredScore > > IMP::em2d::ChiSquaredScores

A vector of reference-counting object pointers.

Definition at line 91 of file scores2D.h.

typedef IMP::Vector<IMP::WeakPointer< ChiSquaredScore > > IMP::em2d::ChiSquaredScoresTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: ChiSquaredScore

Definition at line 91 of file scores2D.h.

typedef IMP::Vector< ClusterSet > IMP::em2d::ClusterSets

Pass or store a set of ClusterSet .

Definition at line 108 of file hierarchical_clustering.h.

typedef IMP::Vector<IMP::Pointer< CollisionCrossSection > > IMP::em2d::CollisionCrossSections

A vector of reference-counting object pointers.

Definition at line 73 of file CollisionCrossSection.h.

typedef IMP::Vector<IMP::WeakPointer< CollisionCrossSection > > IMP::em2d::CollisionCrossSectionsTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: CollisionCrossSection

Definition at line 73 of file CollisionCrossSection.h.

typedef IMP::Vector< CompleteLinkage > IMP::em2d::CompleteLinkages

Pass or store a set of CompleteLinkage .

Definition at line 152 of file hierarchical_clustering.h.

typedef IMP::Vector<IMP::Pointer< DistanceFilter > > IMP::em2d::DistanceFilters

A vector of reference-counting object pointers.

Definition at line 63 of file domino_filters.h.

typedef IMP::Vector<IMP::WeakPointer< DistanceFilter > > IMP::em2d::DistanceFiltersTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: DistanceFilter

Definition at line 63 of file domino_filters.h.

typedef IMP::Vector<IMP::Pointer< DistanceFilterTable > > IMP::em2d::DistanceFilterTables

A vector of reference-counting object pointers.

Definition at line 51 of file domino_filter_tables.h.

typedef IMP::Vector<IMP::WeakPointer< DistanceFilterTable > > IMP::em2d::DistanceFilterTablesTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: DistanceFilterTable

Definition at line 51 of file domino_filter_tables.h.

typedef IMP::Vector<IMP::Pointer< DummyRestraint > > IMP::em2d::DummyRestraints

A vector of reference-counting object pointers.

Definition at line 62 of file DummyRestraint.h.

typedef IMP::Vector<IMP::WeakPointer< DummyRestraint > > IMP::em2d::DummyRestraintsTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: DummyRestraint

Definition at line 62 of file DummyRestraint.h.

typedef IMP::Vector< Em2DRestraintParameters > IMP::em2d::Em2DRestraintParametersList

Pass or store a set of Em2DRestraintParameters .

Definition at line 73 of file ProjectionFinder.h.

typedef IMP::Vector<IMP::Pointer< Em2DRestraint > > IMP::em2d::Em2DRestraints

A vector of reference-counting object pointers.

Definition at line 141 of file em2d/Em2DRestraint.h.

typedef IMP::Vector<IMP::WeakPointer< Em2DRestraint > > IMP::em2d::Em2DRestraintsTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: Em2DRestraint

Definition at line 141 of file em2d/Em2DRestraint.h.

typedef IMP::Vector<IMP::Pointer< EM2DScore > > IMP::em2d::EM2DScores

A vector of reference-counting object pointers.

Definition at line 105 of file scores2D.h.

typedef IMP::Vector<IMP::WeakPointer< EM2DScore > > IMP::em2d::EM2DScoresTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: EM2DScore

Definition at line 105 of file scores2D.h.

typedef IMP::Vector<IMP::Pointer< Fine2DRegistrationRestraint > > IMP::em2d::Fine2DRegistrationRestraints

A vector of reference-counting object pointers.

Definition at line 90 of file Fine2DRegistrationRestraint.h.

typedef IMP::Vector<IMP::WeakPointer< Fine2DRegistrationRestraint > > IMP::em2d::Fine2DRegistrationRestraintsTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: Fine2DRegistrationRestraint

Definition at line 90 of file Fine2DRegistrationRestraint.h.

typedef IMP::Vector<IMP::Pointer< GridStates > > IMP::em2d::GridStatesList

A vector of reference-counting object pointers.

Definition at line 67 of file domino_particle_states.h.

typedef IMP::Vector<IMP::WeakPointer< GridStates > > IMP::em2d::GridStatesListTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: GridStates

Definition at line 67 of file domino_particle_states.h.

typedef IMP::Vector<IMP::Pointer< Image > > IMP::em2d::Images

A vector of reference counted pointers to EM images of type double.

A vector of reference-counting object pointers.

Definition at line 191 of file Image.h.

typedef IMP::Vector<IMP::WeakPointer< Image > > IMP::em2d::ImagesTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: Image

Definition at line 191 of file Image.h.

typedef IMP::Vector< MasksManager > IMP::em2d::MasksManagers

Pass or store a set of MasksManager .

Definition at line 178 of file ProjectionMask.h.

typedef IMP::Vector< MatchTemplateResult > IMP::em2d::MatchTemplateResults

Pass or store a set of MatchTemplateResult .

Definition at line 84 of file image_processing.h.

typedef IMP::Vector<IMP::Pointer< MeanAbsoluteDifference > > IMP::em2d::MeanAbsoluteDifferences

A vector of reference-counting object pointers.

Definition at line 115 of file scores2D.h.

typedef IMP::Vector<IMP::WeakPointer< MeanAbsoluteDifference > > IMP::em2d::MeanAbsoluteDifferencesTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: MeanAbsoluteDifference

Definition at line 115 of file scores2D.h.

typedef IMP::Vector<IMP::Pointer< ParticlesDummyRestraint > > IMP::em2d::ParticlesDummyRestraints

A vector of reference-counting object pointers.

Definition at line 91 of file DummyRestraint.h.

typedef IMP::Vector<IMP::WeakPointer< ParticlesDummyRestraint > > IMP::em2d::ParticlesDummyRestraintsTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: ParticlesDummyRestraint

Definition at line 91 of file DummyRestraint.h.

typedef IMP::Vector< PolarResamplingParameters > IMP::em2d::PolarResamplingParametersList

Pass or store a set of PolarResamplingParameters .

Definition at line 187 of file PolarResamplingParameters.h.

typedef IMP::Vector< ProjectingOptions > IMP::em2d::ProjectingOptionsList

Pass or store a set of ProjectingOptions .

Definition at line 107 of file project.h.

typedef IMP::Vector< ProjectingParameters > IMP::em2d::ProjectingParametersList

Pass or store a set of ProjectingParameters .

Definition at line 53 of file project.h.

typedef IMP::Vector<IMP::Pointer< ProjectionFinder > > IMP::em2d::ProjectionFinders

A vector of reference-counting object pointers.

Definition at line 212 of file ProjectionFinder.h.

typedef IMP::Vector<IMP::WeakPointer< ProjectionFinder > > IMP::em2d::ProjectionFindersTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: ProjectionFinder

Definition at line 212 of file ProjectionFinder.h.

typedef IMP::Vector< ProjectionMask > IMP::em2d::ProjectionMasks

Pass or store a set of ProjectionMask .

Definition at line 71 of file ProjectionMask.h.

typedef IMP::Vector<IMP::Pointer< ProjectionStates > > IMP::em2d::ProjectionStatesList

A vector of reference-counting object pointers.

Definition at line 108 of file domino_particle_states.h.

typedef IMP::Vector<IMP::WeakPointer< ProjectionStates > > IMP::em2d::ProjectionStatesListTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: ProjectionStates

Definition at line 108 of file domino_particle_states.h.

typedef IMP::Vector< RegistrationResult > IMP::em2d::RegistrationResults

Pass or store a set of RegistrationResult .

Definition at line 155 of file RegistrationResult.h.

typedef std::pair<algebra::Transformation2D, double> IMP::em2d::ResultAlign2D

Definition of the result of an alignment. Contains the transformation to apply to the matrix to align and the cross correlation of the solution

Definition at line 22 of file align2D.h.

typedef IMP::Vector<IMP::Pointer< RigidBodiesImageFitRestraint > > IMP::em2d::RigidBodiesImageFitRestraints

A vector of reference-counting object pointers.

Definition at line 87 of file RigidBodiesImageFitRestraint.h.

typedef IMP::Vector<IMP::WeakPointer< RigidBodiesImageFitRestraint > > IMP::em2d::RigidBodiesImageFitRestraintsTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: RigidBodiesImageFitRestraint

Definition at line 87 of file RigidBodiesImageFitRestraint.h.

typedef IMP::Vector<IMP::Pointer< ScoreFunction > > IMP::em2d::ScoreFunctions

A vector of reference-counting object pointers.

Definition at line 79 of file scores2D.h.

typedef IMP::Vector<IMP::WeakPointer< ScoreFunction > > IMP::em2d::ScoreFunctionsTemp

A vector of weak (non reference-counting) pointers to specified objects.

See Also: ScoreFunction

Definition at line 79 of file scores2D.h.

typedef IMP::Vector< SegmentationParameters > IMP::em2d::SegmentationParametersList

Pass or store a set of SegmentationParameters .

Definition at line 68 of file image_processing.h.

typedef IMP::Vector< SingleLinkage > IMP::em2d::SingleLinkages

Pass or store a set of SingleLinkage .

Definition at line 133 of file hierarchical_clustering.h.

typedef std::vector<algebra::Transformation3Ds> IMP::em2d::Transformation3DsList

Class for the movement of rigid bodies respect to each other. The class is initiated with the rigid body that is going to move (let's call it A). Afterwards, one of more rigid bodies can be added as references. Each reference rigid body needs to specify the set of the internal (relative) transformations that A can have respect to it.

Definition at line 27 of file RelativePositionMover.h.

Function Documentation

void IMP::em2d::add_noise	(	cv::Mat &	v,
		double	op1,
		double	op2,
		const String &	mode = `"uniform"`,
		double	df = `3`
	)

Add noise to the values of a matrix.

Supported distributions:

uniform distribution, giving the range (lower, upper). DEFAULT
Gaussian distribution, giving the mean and the standard deviation
add_noise(v1,0, 1);

// uniform distribution between 0 and 1

v1.add_noise(0, 1, "uniform");

// the same

v1.add_noise(0, 1, "gaussian");

// Gaussian distribution with 0 mean and stddev=1

void IMP::em2d::apply_circular_mask	(	const cv::Mat &	mat,
		cv::Mat &	result,
		int	radius,
		double	value = `0.0`
	)

Applies a circular to a matrix. The center of the mask is the center of the matrix.

void IMP::em2d::apply_diffusion_filter	(	const cv::Mat &	m,
		cv::Mat &	result,
		double	beta,
		double	pixelsize,
		unsigned int	time_steps
	)

Smoothing filter by application of the reaction-diffusion equation of Beltrami flow. Adiga, JSB, 2005

beta is the contribution of diffusion versus edge enhancement: 0 - pure reaction, 90 - pure diffusion

Note: The function only works for matrices containing doubles

void IMP::em2d::apply_diffusion_filter	(	Image *	input,
		Image *	filtered,
		double	beta,
		double	pixelsize,
		int	time_steps
	)

Apply the diffusion filter

Parameters

input	Input image
filtered	The image containing the result
beta	The beta parameter of the diffusion filter
pixelsize	The pixel size of the image
time_steps	The number of time steps used for the diffusion

Definition at line 279 of file Image.h.

Here is the call graph for this function:

void IMP::em2d::apply_mask	(	const cv::Mat &	m,
		cv::Mat &	result,
		const cvIntMat &	mask,
		double	val
	)

Applies a binary mask to an image.

Parameters

[in]	m	Input matrix
[in]	result	matrix with the result
[in]	mask	If the mask is 0, the result has the value of val. Otherwise is the value of m.
[in]	val	value to apply when the mask is 0

void IMP::em2d::apply_mean_outside_mask	(	Image *	img,
		double	radius
	)

Fills the values that are outside a circle centered at the center of the image with the mean of the values inside the circle the matrix center

Parameters

[in]	img	Image. It is modified in situ
[in]	radius	of the circle

void IMP::em2d::apply_threshold	(	cv::Mat &	m,
		cv::Mat &	result,
		double	threshold = `0.0`
	)

Applies a threshold to an image threshold is a value such that all pixels below this value are set to zero

void IMP::em2d::apply_variance_filter	(	const cv::Mat &	input,
		cv::Mat &	filtered,
		int	kernelsize
	)

Variance filter for an image. Computes the variance for each pixel using the surrounding ones.

Parameters

[in]	input	image with the data
[out]	filtered	matrix result of the filtering with the variances
[in]	kernelsize	The variance is computed using kernelsize x kernelsize pixels around each one. Kernelsize can only be odd.

void IMP::em2d::apply_variance_filter	(	Image *	input,
		Image *	filtered,
		int	kernelsize
	)

Apply a variance filter to an image

Parameters

input	Input image
filtered	The image containing the result
kernelsize	The size of the kernel to use. The matrix used as kernel will have the same number of rows and columns

Definition at line 266 of file Image.h.

Here is the call graph for this function:

cvIntMat IMP::em2d::create_circular_mask	(	int	rows,
		int	cols,
		int	radius
	)

Creates a circular matrix that is a mask

Parameters

[in]	rows
[in]	cols
[in]	radius	The radius of the mask. The center of the mask is the center of the matrix

Returns: A binary matrix (0/1) with value 1 inside the radius

Images IMP::em2d::create_evenly_distributed_projections	(	const ParticlesTemp &	ps,
		unsigned int	n,
		const ProjectingOptions &	options
	)

This function is slightly different than the other ones. Only generates evenly distributed projections and determines the size of the images that encloses the particles. Should not be used unless this is exactly what you want.

void IMP::em2d::crop	(	Image *	img,
		const IntPair &	center,
		int	size
	)

Crops an image.

Parameters

[in]	img	Image to crop. It is modified in place
[in]	center	The pixel used as the center for cropping
[in]	size	The size of the new image

cv::Mat IMP::em2d::crop	(	const cv::Mat &	m,
		const IntPair &	center,
		int	size
	)

Crop an image

Parameters

[in]	m	Matrix to crop
[in]	center	The pixel used as the center for cropping
[in]	size	The size of the new image

Returns: A matrix with the cropped region

void IMP::em2d::do_combined_fill_holes_and_threshold	(	cv::Mat &	m,
		cv::Mat &	result,
		double	n_stddevs,
		double	threshold = `0.0`
	)

Combines the fill holes and thresholding operations together with normalize.

Parameters

[in]	m	Input matrix
[out]	result	the result matrix
[in]	n_stddevs	Number of standard deviations used to compute the holes
[in]	threshold	Removes values below the threshold value

Note: The function does normalize -> fill_holes -> normalize -> threshold -> normalize

void IMP::em2d::do_dilate_and_shrink_warp	(	cv::Mat &	m,
		const cv::Mat &	grayscale,
		cv::Mat &	kernel
	)

(U. Adiga, 2005)

Parameters

[in]	m	binary matrix to dilate and shrink
[in]	grayscale	grayscale matrix that controls the shrinking
[in]	kernel	dilation kernel

Note: Only tested with binary matrices m with background =0 and foreground = 1

void IMP::em2d::do_extend_borders	(	cv::Mat &	orig,
		cv::Mat &	dst,
		unsigned int	pix
	)

Extends the borders of an image

Parameters

[in]	orig	The image to extend
[in]	dst	The image destination
[in]	pix	number of pixels to extend the borders

void IMP::em2d::do_fill_holes	(	const cv::Mat &	m,
		cv::Mat &	result,
		double	h
	)

Fills the holes in the matrix m of height h.

Parameters

[in]	m	the input matrix
[in]	result	the result matrix
[in]	h	the height

Note: The function does not work in-place

template<class LinkageFunction >

ClusterSet IMP::em2d::do_hierarchical_agglomerative_clustering ( const FloatsList & distances )

Function to perform agglomerative clustering.

Parameters

[in] distances Vector of Floats containing all the possible distances(i,j) between elements to cluster. Given N elements to cluster, there are N vectors of size N

Returns: a ClusterSet class containing all the clustering steps.

Definition at line 180 of file hierarchical_clustering.h.

Here is the call graph for this function:

int IMP::em2d::do_labeling	(	const cvIntMat &	m,
		cvIntMat &	mat_to_label
	)

Labeling function for a matrix.

Parameters

[in]	m	binary matrix to scan. The matrix needs to contain zeros and ones but they can be stored as doubles, floats or ints
[out]	mat_to_label	matrix it is returned as a matrix of ints

Returns: labels The number of labels in the image

void IMP::em2d::do_matrix_to_image_flip ( cv::Mat & m )

Transforms a matrix as is given by FFT functions, into a image interpretation. Works the opposite way too.

Parameters

m	The matrix to flip. The it is changed in situ

void IMP::em2d::do_morphologic_contrast_enhancement	(	const cv::Mat &	m,
		cv::Mat &	result,
		const cv::Mat &	kernel,
		unsigned int	iterations
	)

morphologic enhancement of the contrast This function detects areas in the images and enhances the contrast between them

Parameters

[in]	m	Input matrix
[out]	result
[in]	kernel	morphologic kernel to use
[in]	iterations	Higher number, more contrast

void IMP::em2d::do_morphologic_reconstruction	(	const cv::Mat &	mask,
		cv::Mat &	marker,
		int	neighbors_mode = `4`
	)

morphologic grayscale reconstruction (L Vincent, 1993)

Parameters

[in]	mask	image to reconstruct
[out]	marker	this image contains the initial marker points and will contain the final result
[in]	neighbors_mode	number of neighbors for a pixel to consider when doing the morphologic reconstruction (values: 4, 8).

void IMP::em2d::do_normalize	(	Image *	im,
		bool	force = `false`
	)

Normalize an image subtracting the mean and dividing by the standard deviation

Parameters

im	Image
force	If true, the image is normalized even if the header says that it is already normalized

void IMP::em2d::do_normalize ( cv::Mat & m )

Normalize a openCV matrix to mean 0 and stddev 1. It is done in place.

void IMP::em2d::do_place	(	cv::Mat &	mask,
		cv::Mat &	m,
		const algebra::Vector2D &	v
	)

Parameters

[in]	mask	matrix to place in m
[in]	m	matrix
[in]	v	Pixel of the matrix dest where the center of m is put.

Definition at line 81 of file ProjectionMask.h.

Here is the call graph for this function:

void IMP::em2d::do_project_particles	(	const ParticlesTemp &	ps,
		cv::Mat &	m2,
		const algebra::Rotation3D &	R,
		const algebra::Vector3D &	translation,
		const ProjectingOptions &	options,
		MasksManagerPtr	masks
	)

Projects a set of particles. This is the core function that others call.

Parameters

[in]	ps	particles to project
[in]	m2
[in]	R	rotation to apply to the particles (respect to the centroid)
[in]	translation	Translation to apply after rotation
[in]	options
[in]	masks

Note: See the function get_projection() for the rest of the parameters

algebra::Vector2Ds IMP::em2d::do_project_vectors	(	const algebra::Vector3Ds &	ps,
		const algebra::Rotation3D &	R,
		const algebra::Vector3D &	translation
	)

Project the points contained in Vector3Ds to gen vectors in 2D.

Parameters

[in]	ps	the points
[in]	R	Rotation to apply to the points to project them in the Z axis
[in]	translation	translation to apply to the points

Returns: A set of Vector2D with the projected points

algebra::Vector2Ds IMP::em2d::do_project_vectors	(	const algebra::Vector3Ds &	ps,
		const algebra::Rotation3D &	R,
		const algebra::Vector3D &	translation,
		const algebra::Vector3D &	center
	)

Project the points contained in Vector3Ds.

Parameters

[in]	ps	the points
[in]	R	Rotation to apply to the points to project them in the Z axis
[in]	translation	translation to apply to the points
[in]	center	Center point used for the rotation around it

Returns: A set of Vector2D with the projected points

void IMP::em2d::do_remove_small_objects	(	cvIntMat &	m,
		double	percentage,
		int	background = `0`,
		int	foreground = `1`
	)

Removes small objects from a matrix of integers.

Parameters

[in]	m	the matrix
[in]	percentage	The percentage respect to the largest object that other objects have to be in order to survive the removal.
[in]	background	value for the background after removed
[in]	foreground	value for the foreground after removed

void IMP::em2d::do_resample_polar	(	const cv::Mat &	input,
		cv::Mat &	resampled,
		const PolarResamplingParameters &	polar_params
	)

Resamples a matrix to polar coordinates.

Parameters

[in]	input	matrix to resample
[out]	resampled	result matrix to contain the resampling
[in]	polar_params	Parameters used for the resampling. Extremely useful for speeding up the procedure if they are given with the transformation maps, that can be built in the PolarResamplingParameters class

void IMP::em2d::do_resample_polar	(	Image *	im1,
		Image *	im2,
		const PolarResamplingParameters &	polar_params
	)

Resample an image to polar coordinates

Parameters

im1	The input image
im2	The output image
polar_params	The parameters used for the sampling

void IMP::em2d::do_segmentation	(	const cv::Mat &	m,
		cv::Mat &	result,
		const SegmentationParameters &	params
	)

Segmentation of images.

Parameters

[in]	m	The EM image to segment
[in]	result	The segmented image, with the shape of the molecule
[in]	params

void IMP::em2d::do_subtract_images	(	Image *	first,
		Image *	second,
		Image *	result
	)

Subtract two images

Parameters

first	First image
second	The second image is subtracted from the second
result	Result image

void IMP::em2d::get_autocorrelation2d	(	const cv::Mat &	m,
		cv::Mat &	corr
	)

Computes the autocorrelation matrix.

Parameters

m	The input matrix
corr	The result matrix containing the autocorrelation

void IMP::em2d::get_autocorrelation2d	(	Image *	im1,
		Image *	im2
	)

Compute the autocorrelation for an image

Parameters

im1	The input image
im2	The output image

Definition at line 226 of file Image.h.

Here is the call graph for this function:

void IMP::em2d::get_autocorrelation2d_no_preprocessing	(	const cv::Mat &	M,
		cv::Mat &	corr
	)

Autocorrelation without preprocessing.

Parameters

[in]	M	matrix containing the dft
[out]	corr	the matrix to store the autocorrelation. Must have the proper dimensions when passed

MatchTemplateResults IMP::em2d::get_best_template_matches	(	const cv::Mat &	m,
		const cv::Mat &	templ,
		unsigned int	n
	)

Gets the n first matches between an image and a template

Parameters

[in]	m	Matrix
[in]	templ	Matrix with a template to be found in m
[in]	n	Number of positions to recover

ResultAlign2D IMP::em2d::get_complete_alignment	(	const cv::Mat &	input,
		cv::Mat &	m_to_align,
		bool	apply = `false`
	)

Aligns completely two matrices (rotationally and translationally). Uses the autocorrelation function to speed up the rotational alignment

Parameters

[in]	input	Reference matrix
[in]	m_to_align	Matrix to align to the reference
[in]	apply	if true, apply the transformation to m_to_align after alignment

Returns: The result. Check the definition of ResultAlign2D

em2d::ResultAlign2D IMP::em2d::get_complete_alignment_no_preprocessing	(	const cv::Mat &	input,
		const cv::Mat &	INPUT,
		const cv::Mat &	POLAR1,
		cv::Mat &	m_to_align,
		const cv::Mat &	POLAR2,
		bool	apply = `false`
	)

Aligns two matrices rotationally and translationally without performing preprocessing. Preprocessed data must be provided.

Parameters

[in]	input	first matrix
[in]	INPUT	fft of the first matrix
[in]	POLAR1	fft of the autocorrelation (in polars) of the input.
[in]	m_to_align	the matrix to align with the input
[in]	POLAR2	fft of the autocorrelation (in polars) of m_to_align
[in]	apply	true if m_to_align is transformed at the end

Returns: The result. Check the definition of ResultAlign2D

ResultAlign2D IMP::em2d::get_complete_alignment_with_centers_no_preprocessing	(	const algebra::Vector2D &	center1,
		const algebra::Vector2D &	center2,
		const cv::Mat &	AUTOC_POLAR1,
		const cv::Mat &	AUTOC_POLAR2
	)

Aligns two matrices (rotation and translation) using centers and no preprocessing. Preprocessed data must be provided.

Parameters

[in]	center1	weighted centroid of the reference matrix
[in]	center2	weighted centroid of the matrix to align
[in]	AUTOC_POLAR1	fft of the autocorrelation (in polars) of the input.
[in]	AUTOC_POLAR2	fft of the autocorrelation (in polars) of m_to_align

Returns: The result. Check the definition of ResultAlign2D

void IMP::em2d::get_correlation2d	(	const cv::Mat &	A,
		const cv::Mat &	B,
		cv::Mat &	corr
	)

Correlation matrix between two 2D matrices using FFT.

Parameters

[in]	A	first matrix
[in]	B	second matrix
[out]	corr	matrix of results

void IMP::em2d::get_correlation2d	(	Image *	im1,
		Image *	im2,
		Image *	corr
	)

Compute the cross correlation matrix between two images

Parameters

im1	First input image
im2	First second image
corr	The output image of cross correlation values

Definition at line 236 of file Image.h.

Here is the call graph for this function:

void IMP::em2d::get_correlation2d_no_preprocessing	(	const cv::Mat &	M1,
		const cv::Mat &	M2,
		cv::Mat &	corr
	)

Correlation without preprocessing.

Returns: the correlation matrix between two 2D matrices using FFT

Parameters

[in]	M1	matrix containing the dft of the first matrix
[in]	M2	matrix containing the dft of the second matrix
[out]	corr	matrix of results (It MUST have the right size in advance)

double IMP::em2d::get_cross_correlation_coefficient	(	const cv::Mat &	m1,
		const cv::Mat &	m2
	)

Computes the cross-correlation coefficient between to matrices.

double IMP::em2d::get_cross_correlation_coefficient	(	Image *	im1,
		Image *	im2
	)

Cross correlation between two images.

Get the cross correlation coefficient between 2 images

Parameters

im1	First image
im2	Second image

Returns: The value of the coefficient. Ranges from 0 to 1

std::string IMP::em2d::get_data_path ( std::string file_name )

Return the full path to one of this module's data files.

To read the data file "data_library" that was placed in the data directory of this module, do something like

std::ifstream in(IMP::em2d::get_data_path("data_library"));

This will ensure that the code works both when IMP is installed or if used via the setup_environment.sh script.

Note: Each module has its own data directory, so be sure to use this function from the correct module.

void IMP::em2d::get_diffusion_filtering_partial_derivative	(	const cv::Mat &	m,
		cv::Mat &	der,
		double	dx,
		double	dy,
		double	ang
	)

Partial derivative with respect to time for an image filtered with diffusion-reaction

Parameters

[in]	m	input matrix
[in]	der	output derivative matrix
[in]	dx	- step for x
[in]	dy	- step for y
[in]	ang	- parameter for weight diffusion and edge detection (90-0)

void IMP::em2d::get_domes	(	cv::Mat &	m,
		cv::Mat &	result,
		double	h
	)

Gets the domes of m with height h.

Parameters

[in]	m	the input matrix
[in]	result	the result matrix
[in]	h	the height

Note: The function does not work in-place

unsigned int IMP::em2d::get_enclosing_image_size	(	const ParticlesTemp &	ps,
		double	pixel_size,
		unsigned int	slack
	)

Get an automatic size for an image that contains the particles.

slack is the number of pixels left as border

RegistrationResults IMP::em2d::get_evenly_distributed_registration_results ( unsigned int n_projections )

Provides a set of registration results with directions of projection evenly distributed in the hemisphere

Parameters

[in] n_projections the number of requested projections

std::string IMP::em2d::get_example_path ( std::string file_name )

Return the full path to one of this module's example files.

To read the example file "example_protein.pdb" that was placed in the examples directory of this module, do something like

std::ifstream in(IMP::em2d::get_example_path("example_protein.pdb"));

This will ensure that the code works both when IMP is installed or if used via the setup_environment.sh script.

Note: Each module has its own example directory, so be sure to use this function from the correct module.

void IMP::em2d::get_fft_using_optimal_size	(	const cv::Mat &	m,
		cv::Mat &	M
	)

Get the FFT of a matrix using padding with other matrix that can be computed with FFT in an optimal way. i.e. with a size that makes the FFT algorithm work faster

Parameters

m	The input matrix
M	The output matrix with the FFT

Note: The output matrix can have (and frequently will have) different dimensions than the input matrix

double IMP::em2d::get_global_score ( const RegistrationResults & RRs )

Get the global score given a set of individual registration results from images

Note

The function checks what time of registration results are given.

If the registration results correspond to a coarse registration, the score is based on the cross-correlation (currently, the score is a mean of the cross-correlation coefficients.
If the registration results are obtained after a fine registration, the score is the average of all the registration scores. This score g depends on the function selected. Eg. EM2DScore.

Floats IMP::em2d::get_histogram	(	const cv::Mat &	m,
		int	bins
	)

Computes the histogram of a matrix.

Parameters

[in]	m	Matrix with the data
[in]	bins	Number of bins to use in the histogram

Returns: vector with the values for each bin

Floats IMP::em2d::get_histogram	(	Image *	img,
		int	bins
	)

Gets an histogram of the values of the image

Parameters

img	The image
bins	The number of bins to use to build the histogram

Returns: The histogram: number of points per bin

Definition at line 255 of file Image.h.

Here is the call graph for this function:

double IMP::em2d::get_mean	(	const cv::Mat &	mat,
		const cvIntMat &	mask
	)

Mean of an matrix inside a mask

Parameters

[in]	mat	The matrix
[in]	mask	If a pixel is not zero, is considered for computing the mean

Returns: The mean

std::string IMP::em2d::get_module_version ( )

Return the version of this module, as a string.

Note: This function is only available in Python.

Definition at line 4 of file EMageFit/__init__.py.

void IMP::em2d::get_morphologic_gradient	(	const cv::Mat &	m,
		cv::Mat &	result,
		const cv::Mat &	kernel
	)

Morphologic gradient: dilation-erosion

Parameters

[in]	m	Input matrix
[out]	result
[in]	kernel	morphologic kernel

double IMP::em2d::get_overlap_percentage	(	cv::Mat &	m1,
		cv::Mat &	m2,
		const IntPair &	center
	)

Get the percentage of overlap between two matrices. Two images are overlapping in a pixel if both have values > 0. The overlap is (pixels overlapping) / (pixels > 0 in m2)

Parameters

[in]	m1	First matrix
[in]	m2	Matrix used to check the overlap. This matrix can be of the same size of m1 or smaller.
[in]	center	Indicates the position of m1 where to put the center m2. E.g., if center is (32,16) the center of m2 will be in the pixel (32,16) of m1.

void IMP::em2d::get_projection	(	em2d::Image *	img,
		const ParticlesTemp &	ps,
		const RegistrationResult &	reg,
		const ProjectingOptions &	options,
		MasksManagerPtr	masks = `MasksManagerPtr()`,
		String	name = `""`
	)

Generates a projection from particles.

Parameters

[in]	img
[in]	ps	particles to project
[in]	reg	Registration value with the parameters of the projection
[in]	options
[in]	masks	Precomputed masks for projecting the particles. Very useful for speeding the projection procedure if they are given. If nullptr, they are computed
[in]	name

Returns: img the projection will be stored here

Note: See the function get_projections() for the rest of the parameters

em2d::Images IMP::em2d::get_projections	(	const ParticlesTemp &	ps,
		const algebra::SphericalVector3Ds &	vs,
		int	rows,
		int	cols,
		const ProjectingOptions &	options,
		Strings	names = `Strings()`
	)

Generates projections from particles.

Parameters

[in]	ps	particles to project
[in]	vs	set of spherical vectors with the directions of projection
[in]	rows	size of the images
[in]	cols
[in]	options	Options for control the projecting
[in]	names	names of the images

em2d::Images IMP::em2d::get_projections	(	const ParticlesTemp &	ps,
		const RegistrationResults &	registration_values,
		int	rows,
		int	cols,
		const ProjectingOptions &	options,
		Strings	names = `Strings()`
	)

Generates projections from particles.

registration_values describes registration values with the parameters of the projections to generate.

Note: See the function get_projections() for the rest of the parameters

RegistrationResults IMP::em2d::get_random_registration_results	(	unsigned int	n,
		double	maximum_shift = `5.0`
	)

Provides a set of random registration results (or parameters)

Parameters

[in]	n	the number of requested results
[in]	maximum_shift	shift from the center in pixels

double IMP::em2d::get_rotation_error	(	const RegistrationResult &	rr1,
		const RegistrationResult &	rr2
	)

angle in the axis-angle representation of the rotation that takes first to second

em2d::ResultAlign2D IMP::em2d::get_rotational_alignment	(	const cv::Mat &	input,
		cv::Mat &	m_to_align,
		bool	apply = `false`
	)

Aligns two matrices rotationally. Based on the autocorrelation function of the matrices.

Parameters

[in]	input	Reference matrix
[in]	m_to_align	Matrix to align to the reference
[in]	apply	if true, apply the transformation to m_to_align after alignment

Returns: The result. Check the definition of ResultAlign2D

ResultAlign2D IMP::em2d::get_rotational_alignment_no_preprocessing	(	const cv::Mat &	POLAR1,
		const cv::Mat &	POLAR2
	)

Computes the rotational alignment for two autocorrelation matrices It is assumed that the arguments are FFTs

Parameters

[in]	POLAR1	fft of the first autocorrelation (in polars)
[in]	POLAR2	fft of the second autocorrelation (in polars)

Returns: The result. Check the definition of ResultAlign2D

double IMP::em2d::get_shift_error	(	const RegistrationResult &	rr1,
		const RegistrationResult &	rr2
	)

Distance between the two in-plane translations.

void IMP::em2d::get_spectrum	(	const cv::Mat &	m,
		cv::Mat &	real,
		cv::Mat &	imag
	)

Computes the fft of a matrix and returns the real and imaginary matrices.

Parameters

m	The input matrix
real	The matrix with the real part of the FFT matrix
imag	The imaginary part of the FFT matrix

void IMP::em2d::get_transformed	(	const cv::Mat &	input,
		cv::Mat &	transformed,
		const algebra::Transformation2D &	T
	)

Applies a transformation to a matrix. First rotates the matrix using the matrix center as the origin of the rotation, and then applies the translation

ResultAlign2D IMP::em2d::get_translational_alignment	(	const cv::Mat &	input,
		cv::Mat &	m_to_align,
		bool	apply = `false`
	)

Aligns two matrices translationally.

Parameters

[in]	input	Reference matrix
[in]	m_to_align	Matrix to align to the reference
[in]	apply	if true, apply the transformation to m_to_align after alignment

Returns: The result. Check the definition of ResultAlign2D

ResultAlign2D IMP::em2d::get_translational_alignment_no_preprocessing	(	const cv::Mat &	M1,
		const cv::Mat &	M2
	)

Aligns two matrices translationally without preprocessing. The preprocessed data must be provided.

Parameters

[in]	M1	the dft the first matrix (input)
[in]	M2	the dft of the matrix to align with the input

Returns: The result. Check the definition of ResultAlign2D

Ints IMP::em2d::get_unique_index ( const algebra::Rotation3D & rot )

Map a rotation to a list of 4 "unique" integers.

Each integer is simply the integer part and the first 2 decimal places of the floating point value from the quaternion. This list of integers can then be used as a key for rotations.

Images IMP::em2d::read_images	(	const Strings &	names,
		const ImageReaderWriter *	rw
	)

Reads images from files (For compatibility with SPIDER format, the images are read from floats)

Parameters

[in]	names	filenames of the images
[in]	rw	reader/writer to use

RegistrationResults IMP::em2d::read_registration_results ( const String & filename )

Reads a set of registration results.

void IMP::em2d::save_images	(	Images	images,
		const Strings &	names,
		const ImageReaderWriter *	rw
	)

Saves images to files (For compatibility with SPIDER format, the images are written to floats)

Parameters

[in]	images	Images to save
[in]	names	filenames of the images
[in]	rw	reader/writer to use

void IMP::em2d::show	(	const cv::Mat &	m,
		std::ostream &	out = `std::cout`
	)

Prints a OpenCV matrix.

template<typename T >

void IMP::em2d::show	(	const cv::Mat_< T > &	m,
		std::ostream &	out = `std::cout`
	)

Show a Mat_.

Definition at line 45 of file opencv_interface.h.

void IMP::em2d::write_matrix	(	cv::Mat &	m,
		std::string	name
	)

Quick and dirty way of writing a OpenCV matrix to a Spider image.

void IMP::em2d::write_registration_results	(	String	filename,
		const RegistrationResults &	results
	)

Writes a set of registration results.

void IMP::em2d::write_vectors_as_pdb	(	const algebra::Vector2Ds	vs,
		const String	filename
	)

Generate a PDB file from a set of Vector2D (all the points are C-alpha) and the Z coordinate is set to 0.

Note: This version deals with the problem of having more than 10000 points

Variable Documentation

const unsigned int IMP::em2d::ALIGN2D_NO_PREPROCESSING = 0

Methods for registration used by the finder.

Definition at line 31 of file ProjectionFinder.h.

Detailed Description

OpenCV

Info

Classes

Typedefs

Functions

Variables

Standard module functions

Typedef Documentation

Function Documentation

Variable Documentation